RM 032
RM 032
RM 032

Men's collection

RM 032

AUTOMATIC DIVER’S WATCH

Scroll down

AUTOMATIC CHRONOGRAPH CREATED FOR DEEP-SEA DIVING

Performance, safety, efficiency, beauty, ergonomics: they all come together in this model. The sense of security is felt as soon as you look at this instrument thanks to the visibility of its functions, its easy-to-use controls and the accuracy of the information it displays.
At 300 metres under water, there is no room for error.

Main characteristics

A second crown is added which, when rotated once, locks the push-pieces and crown so that no function can be actuated by accidental pressure or a manipulation error. This same principle applies to the bezel, a technical miracle, which can only be manipulated by using two push- pieces to ensure total safety.
Its operating accuracy and water-tightness are the subject of countless checks throughout the fitting and assembly process of the mechanical components. The case, in three parts, requires 830 machining operations, and its absolute ergonomic perfection is achieved through manual brushing and polishing.
Round case - available in titanium, 18K white gold or red gold.

01
CALIBER RMAC2
Automatic winding movement with hours, minutes, seconds, oversize date, month, flyback chronograph with minutes and seconds counter, hour counter, running indicator and adjustable rotor geometry.

OVERSIZE DATE DISPLAY Semi-instantaneous, placed in a red outlined horizontal aperture under 12 o’clock.

02
CALIBER RMAC2
Automatic winding movement with hours, minutes, seconds, oversize date, month, flyback chronograph with minutes and seconds counter, hour counter, running indicator and adjustable rotor geometry.

MONTH DISPLAY Semi-instantaneous indicated by arabic numerals, placed between 4 and 5 o’clock.

03
CALIBER RMAC2
Automatic winding movement with hours, minutes, seconds, oversize date, month, flyback chronograph with minutes and seconds counter, hour counter, running indicator and adjustable rotor geometry.

RUNNING INDICATOR Located at 3 o’clock. Thanks to both its geometry and 2-rpm rotational frequency, it is possible to check at a glance the correct functioning of the running movement. The running indicator disc is composed of successive Superluminova and black sectors; as a result it can be easily seen during day or night.

04
CALIBER RMAC2
Automatic winding movement with hours, minutes, seconds, oversize date, month, flyback chronograph with minutes and seconds counter, hour counter, running indicator and adjustable rotor geometry.

CALIBER RMAC2 Automatic winding movement with hours, minutes, seconds, oversize date, month, flyback chronograph with minutes and seconds counter, hour counter, running indicator and adjustable rotor geometry.

Your browser does not support Canvas.
arrow

Approximate scale 1 : 1

Main characteristics

A second crown is added which, when rotated once, locks the push-pieces and crown so that no function can be actuated by accidental pressure or a manipulation error. This same principle applies to the bezel, a technical miracle, which can only be manipulated by using two push- pieces to ensure total safety.
Its operating accuracy and water-tightness are the subject of countless checks throughout the fitting and assembly process of the mechanical components. The case, in three parts, requires 830 machining operations, and its absolute ergonomic perfection is achieved through manual brushing and polishing.
Round case - available in titanium, 18K white gold or red gold.

CASE RM 032

The RM 032 is water resistant to 300 meters (30 atmospheres), following ISO 6425 diver’s watch norms. This is achieved with a unique, curved, tripartite case design. It is complemented with a screwed crown construction and the integration of the horns in the case. The lugs of each RM 032 version have screws that optimally fix the diver’s rubber strap. In the world of horology, the case of the RM 032 is one the most difficult to manufacture. After a 1h30- hour turning phase, this tripartite case has to undergo 830 operations planned during an 9-hour milling phase. After a 11-hour machining phase, each case has to pass a full day of quality control. The pushers and their respective components and the crown require a 10-day machining phase. Within this period, numerous water resistant tests and quality controls are carried out and also the hand brushing and polishing of the case. All of these steps are paramount to obtain ergonomic levels specific to Richard Mille watches.

CASE RM 032

The RM 032 is water resistant to 300 meters (30 atmospheres), following ISO 6425 diver’s watch norms. This is achieved with a unique, curved, tripartite case design. It is complemented with a screwed crown construction and the integration of the horns in the case. The lugs of each RM 032 version have screws that optimally fix the diver’s rubber strap. In the world of horology, the case of the RM 032 is one the most difficult to manufacture. After a 1h30- hour turning phase, this tripartite case has to undergo 830 operations planned during an 9-hour milling phase. After a 11-hour machining phase, each case has to pass a full day of quality control. The pushers and their respective components and the crown require a 10-day machining phase. Within this period, numerous water resistant tests and quality controls are carried out and also the hand brushing and polishing of the case. All of these steps are paramount to obtain ergonomic levels specific to Richard Mille watches.

LOCKING CROWN

During deep sea dives, the water pressure on the pushers and crown is powerful enough to unintentionally operate one of the pushers, eg. the “start” pusher of the chronograph. We also need to take into account that making a mistake with the crown is also a possibility. In order to avoid any external pressure effect or accidental manipulation, Richard Mille developed a locking crown for the RM 032 that is able to lock the pushers and ensure perfect water resistance to 300 meters. The crown and pushers can be locked by simply rotating its ring (green index if unlocked, red index if locked). The movement is prevented from being damaged because of overpressure or shocks on the crown. The water resistance is enhanced thanks to maximum pressure on the seals. This innovative device is specific to the RM 032 and is patent pending.

UNIDIRECTIONAL BEZEL

Built up of three layers connected with 22 screws, turning unidirectionally following ISO 6425 norms in order to avoid timing miscalculations. The use of an additional screwed system attaching the bezel to the watchcase makes it totally stable as well as impossible to inadvertently dislocate or loosen. In addition, the use of screws allows for perfect adjustment as the bezel is not tensioned into position. For clearer visibility under murky conditions, starting at 12 o’clock, the minute markers of the first quarter are highlighted in red.

UNIDIRECTIONAL BEZEL

Built up of three layers connected with 22 screws, turning unidirectionally following ISO 6425 norms in order to avoid timing miscalculations. The use of an additional screwed system attaching the bezel to the watchcase makes it totally stable as well as impossible to inadvertently dislocate or loosen. In addition, the use of screws allows for perfect adjustment as the bezel is not tensioned into position. For clearer visibility under murky conditions, starting at 12 o’clock, the minute markers of the first quarter are highlighted in red.

FLYBACK CHRONOGRAPH

By using the pusher between 4 and 5 o’clock, the running chronograph can be reset without first having to stop the mechanism. This was originally developed for pilots in order to not waste time (and therefore accuracy) from stopping, resetting and starting the chronograph whilst crossing a navigational point. Function: the user can start or stop the chronograph function via the pusher located between 1 and 2 o’clock. The flyback function can be continuously reset by depressing the second pusher located between 4 and 5 o’clock.

Characteristics

ROTOR WITH VARIABLE GEOMETRY
- Arm in grade 2 titanium
- Flange in grade 2 titanium
- 6-positional adjustment via grade 5 titanium screws
- Ribs in 18k white gold, high palladium content
- Weight segment in white gold
- Ceramic ball bearings
- Unidirectional anti-clockwise winding direction
This exclusive Richard Mille design allows the rewinding of the mainspring to be adapted most effectively to the user’s activity level.
By adjusting the setting of the rib’s placement, the rotor’s inertia is modified to either speed up the winding process in the case of leisurely arm movements, or slow it down when sporting activities are pursued. As a result, this invention allows the movement’s winding mechanism to be optimized.

DOUBLE BARREL SYSTEM
The double barrel system contributes to the torque stability over a longer period. This is achieved by using more rotations of the barrel, thereby reducing pressure and wear on the teeth, bearings and pivots, hence an improved long-term performance.

BOTTOM PLATE, BRIDGES AND BALANCE COCK MADE OF TITANIUM
These components are in grade 5 titanium with black PVD coating. This provides the whole assembly great rigidity, as well as precise surface flatness that is essential for the perfect functioning of the gear train.

SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE BRIDGES AND CASE
Due their design, these screws offer better control of the torque applied during assembly.
These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well.

INTERIOR FLANGES (upper and lower)
In carbon fiber, with index points filled with approved luminous material.

DIAL
In sapphire (thickness: 0.40 mm) with anti-glare treatment (2 sides), protected by 8 silicon braces inserted in the upper and lower grooves.

CRYSTAL
- Bezel side: in sapphire (1800 Vickers) with anti-glare treatment (2 sides)
- Thickness: 3.00 mm

- Case back: in sapphire with anti-glare treatment (2 sides)

- Thickness: at the center 1.40 mm and at outer edges 2.07 mm

DIAMETER
50.00 mm x 17.80 mm