The objective for the RM 037 is to construct a synthesis, to bring together all the experience Richard Mille have gained since the creation of the brand in one watch. And it had to be spectacular, both technically and aesthetically, with finishing also of an exceptional level. Beneath its highly contemporary appearance, the watch respects all the canons of high-end watchmaking.
Setting gemstones in NTPT carbon is a new adventure for the brand.
Unlike gold, which can be worked directly with tools to create the prongs that will hold the diamonds, the hardness and resistance of NTPT carbon mean special CNC machines for milling equipped with diamond tools are required to perform the mitraillage involved in a pavé setting.
NEW PATENTED STEM-CROWN CONSTRUCTION This designed crown allows the integrity of the movement to be fully guaranteed and protected from external influences, since it does not use a classical crown attachment going into the depth of the movement’s heart.
FUNCTION SELECTOR A push-button located at 4 o’clock allows one to select the winding, neutral and handsetting functions with a simple push in a manner similar to a car’s gearbox. An aperture located at 4 o’clock shows the function selected: W (Winding) - N (Neutral) - H (Handsetting).
OVERSIZE DATE DISPLAY Semi-instantaneous, horizontally placed under 12 o’clock, functioning via two skeletonised calendar discs over a white field. The date can be easily corrected via the pusher located at 10 o’clock.
CALIBER CRMA1 Skeletonised automatic movement with hours, minutes, adjustable rotor geometry, oversize date and function selector.
FAST ROTATING BARREL (5 hours per revolution instead of 7.5 hours)
This type of barrel has the following advantages: - The phenomenon of periodic internal mainspring adhesion is significantly diminished, thereby increasing performance, - Provision of an excellent mainspring delta curve with an ideal power reserve/performance and regularity ratio.
NEWLY DEVELOPED GEAR TEETH PROFILE
The entire going train of the watch, the primary transmitter of power throughout the movement, utilizes a special profile for the teeth of the wheels. Developed specifically for the caliber CRMA1, the wheels use a 20° pressure angle. This system equalizes any discrepancies that might arise between the centers of each wheel, for instance during thermal changes and normal use, and promotes an excellent transmission of torque to the balance wheel, thus supporting excellent chronometric characteristics.
SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE MOVEMENT
This permits better control of the torque applied to the screws during assembly. These screws are therefore unaffected by physical manipulation during assembly or disassembly and age well.
In carbon fiber; index points filled with approved luminous material.
- Bezel side: in sapphire (1,800 Vickers) with anti-glare treatment (2 sides)
- Thickness: 1.60 mm Case back: in sapphire with anti-glare treatment (2 sides)
- Thickness: at the center 0.95 mm and outer edges 1.66 mm
- Microblasted anglage
- Microblasted milled section
- Microblasted sinks
- Electroplasma treatment for the baseplate and the bridges
- Satin finished surfaces • Anglage hand polished • Hand polished sinks
- Burnished sections
- lapped and polished ends • Burnished pivots
- Post faces polished
- Concave chamfering with a diamond tool
- diamond polished angles
- Circular-finished faces
- Rhodium-plating (before cutting the teeth).
52.63 x 34.40 x 13.00 mm.