RM 60-01
RM 60-01
RM 60-01

RM 60-01

Les Voiles de St. Barth

Scroll down

6TH EDITION OF THE CARIBBEAN’S FINEST SAILING RACE

The principles and values of yachting are a perfect reflection of Richard Mille’s philosophy, which is based on a combination of extreme performance, cutting-edge technology, a clear artistic vision and respect for watchmaking tradition. The timepiece is driven by the RM 60-01, an automatic flyback chronograph caliber in grade 5 titanium, which facilitates navigation thanks to its unique rotating bezel featuring a wind rose and a graduated 360° 24-hour disc. Its operating principle relies on two key pieces of data: the local time and the position of the sun in the sky. By simply pointing the UTC hand at the sun and adjusting the local time on the bezel, the latter will indicate the compass points in both the northern and southern hemispheres without the need for any additional calculation. Specifically designed for competitive sailing, the RM 60-01 Voiles de Saint Barth features UTC functions and a countdown timer as well as a patented locking crown and pushers, all of which illustrate the extreme level of development attained by Richard Mille in this timepiece intended for skippers. Limited edition of just 50 timepieces, available exclusively in North and South America.

Main characteristics

Powered by the grade 5 titanium RMAC2 caliber with its 55 hours of power reserve, variable inertia balance, complete flyback chronograph functions, annual calendar with oversize date and UTC function, the RM 60-01 adds navigational capabilities thanks to its special rotating bezel with indications of the four cardinal points combined with a graduated 360° and a 24-hour scale disk.

01
CALIBER RMAC2
Automatic winding movement with hours, minutes, running seconds at 3 o’clock, oversize date, month, annual calendar, Flyback chronograph with central seconds counter, and 30 minute countdown timer at 9 o’clock, 24 hour totalizer at 6 o’clock, UTC function and adjustable rotor geometry.

UTC FUNCTION The RM 60-01 features a UTC hand that can be used either as a second time zone indicator or in combination with the sun and the rotating bezel to orientate the points of the compass. It can be easily adjusted using the pusher at 8 o’clock.

02
CALIBER RMAC2
Automatic winding movement with hours, minutes, running seconds at 3 o’clock, oversize date, month, annual calendar, Flyback chronograph with central seconds counter, and 30 minute countdown timer at 9 o’clock, 24 hour totalizer at 6 o’clock, UTC function and adjustable rotor geometry.

BIDIRECTIONAL BEZEL WITH COMPASS Conceived to allow navigators to orient themselves at sea thanks to the rotating bezel featuring the display of the four cardinal points, a measuring disc of 360° and a 24-hour scale. Its functioning principle relies on 2 factors: the knowledge of the local time and the position of the sun in the sky. First, the UTC hand is placed pointing towards the sun. Then the rotating bezel just needs to be set in order for the UTC hand to indicate the local hour displayed on the bezel. North, East, South and West are then shown to the user. What differentiates the RM 60-01 from the other “regatta” watches is that it can be used for orientation in both the northern and the southern hemispheres without any calculation, simply by selecting the appropriate scale.

03
CALIBER RMAC2
Automatic winding movement with hours, minutes, running seconds at 3 o’clock, oversize date, month, annual calendar, Flyback chronograph with central seconds counter, and 30 minute countdown timer at 9 o’clock, 24 hour totalizer at 6 o’clock, UTC function and adjustable rotor geometry.

COUNTDOWN Located at 9 o’clock, the hand is replaced by a skeletonised 60 minutes-marked disc. The pilot can read minutes elapsed but also remaining minutes.

04
CALIBER RMAC2
Automatic winding movement with hours, minutes, running seconds at 3 o’clock, oversize date, month, annual calendar, Flyback chronograph with central seconds counter, and 30 minute countdown timer at 9 o’clock, 24 hour totalizer at 6 o’clock, UTC function and adjustable rotor geometry.

CALIBER RMAC2 Automatic winding movement with hours, minutes, running seconds at 3 o’clock, oversize date, month, annual calendar, Flyback chronograph with central seconds counter, and 30 minute countdown timer at 9 o’clock, 24 hour totalizer at 6 o’clock, UTC function and adjustable rotor geometry.

Your browser does not support Canvas.
arrow

Approximate scale 1 : 1

Main characteristics

Powered by the grade 5 titanium RMAC2 caliber with its 55 hours of power reserve, variable inertia balance, complete flyback chronograph functions, annual calendar with oversize date and UTC function, the RM 60-01 adds navigational capabilities thanks to its special rotating bezel with indications of the four cardinal points combined with a graduated 360° and a 24-hour scale disk.

CASE

The case features a unique four-part structure. The system is completed by the incorporation of horns in the case assembly. The four-part case of the RM 60-01 is very difficult to make. After a turning operation lasting 1 hour and 40 minutes, no less than 800 milling operations are required, taking several hours. Machining demands nearly 11 hours of separate operations. It is followed by a meticulous quality control procedure that takes a full day for each case. The 3 pushers, their components and the crown of the RM 60-01 require 10 days of machining, during which they undergo numerous tests for water-resistance and quality control, followed by the manual brushing and polishing of the entire case. All of these stages are vital in producing the characteristic ergonomic quality of Richard Mille watches.

CASE

The case features a unique four-part structure. The system is completed by the incorporation of horns in the case assembly. The four-part case of the RM 60-01 is very difficult to make. After a turning operation lasting 1 hour and 40 minutes, no less than 800 milling operations are required, taking several hours. Machining demands nearly 11 hours of separate operations. It is followed by a meticulous quality control procedure that takes a full day for each case. The 3 pushers, their components and the crown of the RM 60-01 require 10 days of machining, during which they undergo numerous tests for water-resistance and quality control, followed by the manual brushing and polishing of the entire case. All of these stages are vital in producing the characteristic ergonomic quality of Richard Mille watches.

FLYBACK CHRONOGRAPH

By using the pusher between 4 and 5 o’clock, the running chronograph can be reset without first having to stop the mechanism. This was originally developed for pilots in order to not waste time (and therefore accuracy) from stopping, resetting and starting the chronograph whilst crossing a navigational point. While the chronograph function is activated, the hours and minutes show up the elapsed time thanks to the counter at 6 and 9 o'clock, the seconds are indicated by the central hands. Function: the user can start or stop the chronograph function via the pusher located between 1 and 2 o’clock. The flyback function can be continuously reset by depressing the second pusher located between 4 and 5 o’clock.

OVERSIZE DATE DISPLAY

Semi-instantaneous, placed in a red outlined horizontal aperture under 12 o’clock with automatic adjustment for months of 30 or 31 days.

OVERSIZE DATE DISPLAY

Semi-instantaneous, placed in a red outlined horizontal aperture under 12 o’clock with automatic adjustment for months of 30 or 31 days.

MONTH DISPLAY

Semi-instantaneous indicated by Arabic numerals, placed between 4 and 5 o’clock.

LOCKING CROWN

In order to avoid accidental actuation resulting from an error of manipulation, Richard Mille developed a secondary locking crown that is able to lock both pushers simultaneously with a simple turn. The green and red indexes respectively show whether the locking mechanism is in operation or deactivated. This complex, innovative mechanism is exclusive to Richard Mille.